Skip to main content

Jupiter

Introduction

Milk-V Jupiter, powered by the Spacemit K1/M1 SoC, is the world's first Mini ITX device to support both RVA22 and RVV1.0. This device integrates a standard PCIe connector, supporting common PCIe devices such as graphics cards, PCIe to SATA adapters, and network cards. It features dual Gigabit Ethernet interfaces, onboard Wi-Fi 6/BT 5.2, and supports NVMe SSDs, making it an ideal choice for an entry-level RISC-V desktop.

Document Pictures

Hardware specifications

Milk-V JupiterDetailed specifications
SoCSPACEMIT K1/M1, Octa-core X60™(RV64GCVB), RVA22, RVV1.0
AI-Power2.0TOPS
RAM4GB / 8GB / 16GB LPDDR4X
GPUIMG BXE-2-32@819MHz, 32KB SLC
OpenGL ES 1.1/3.2
EGL1.5
OpenCL 3.0
Vulkan 1.3
MultimediaH.265/H.264/VP8/VP9/MPEG4/MPEG2 decoder 4K@60fps
H.265/H.264/VP8/VP9 encoder 4K@30fps
Support simultaneously processing encoding
- 1080P@60fps and decoding
- 1080P@60fps
Support simultaneously
- processing H264/H265 encoding
- 1080P@30fps and H264/H265
- decoding 4K@30fps
Storage1x SPI Flash for boot
1x M.2 M Key Connector for M.2 NVMe SSD (PCIe 2.0 x2)
1x eMMC Connector
1x microSD Card Slot
Ethernet2x Gigabit RJ45 Port with PoE support(Additional PoE Module Required)
WirelessWI-FI6/BT5.2 Onboard
USB2x USB 3 Type-A HOST Ports
2x USB 2 Type-A HOST Ports
1x Type-C (USB2 OTG, for Firmware Download), Support PD power supply
2x USB 3.0 Interface via Front USB header
2x USB 2.0 Interface via Front USB header
Display1x Standard HDMI, up to 1920x1440@60Hz
Audio1x Headphone Jack
1x Microphone Jack
PCIe1x PCIe x8 Slot (PCIe 2.1, 2-lane), Supports Graphic Cards and PCIe to SATA, etc.
Others1x PWM fan Connector
1x RTC Socket(CR1220 battery)
1x Front Panel header for Power Button / Reset Button / Status LED / Power LED
2x SATA Power Connector(4P)
1x SoC Uart Debug(3P)
1x Debug(4P)
Power1x 12V DC Power Jack(55x25mm)
1x Standard 24-Pin ATX Power Supply Interface
1x Type-C PD Power supply
OSUbuntu / Fedora / Bianbu
Size170mm x 170 mm(Standard Mini-ITX)
tip

The differences between Spacemit M1 and K1 are as follows:

  • The M1 uses a package with better cooling performance and has a default frequency of 1.8GHz.
  • The K1 has a default frequency of 1.6GHz.
  • carbonfix
  • hokamilkv